|
|
@@ -0,0 +1,136 @@
|
|
|
+---
|
|
|
+date: 2016-04-09T16:50:16+02:00
|
|
|
+title: Multisensor v2
|
|
|
+weight: 1
|
|
|
+---
|
|
|
+
|
|
|
+
|
|
|
+
|
|
|
+
|
|
|
+### Safety information
|
|
|
+
|
|
|
+{{% notice warning %}}
|
|
|
+Read these instructions carefully and look at the equipment to become familiar
|
|
|
+with the device before trying to install, operate, service or maintain it. The
|
|
|
+following special messages may appear throughout this bulletin or on the
|
|
|
+equipment to warn of potential hazards or to call attention to information that
|
|
|
+clarifies or simplifies a procedure.
|
|
|
+{{% /notice %}}
|
|
|
+
|
|
|
+
|
|
|
+
|
|
|
+<p><i class="fas fa-exclamation-triangle"></i> Do not power the device from USB and Main power connector simultaneously that can damage the device permanently.</p>
|
|
|
+
|
|
|
+
|
|
|
+
|
|
|
+### Overview
|
|
|
+
|
|
|
+The Dakton Multisensor V2 is a versatile device for site monitoring.
|
|
|
+
|
|
|
+### Device Features
|
|
|
+
|
|
|
++ Wifi 2.4G Hz.
|
|
|
++ Ethernet 10/100.
|
|
|
++ Web Interface.
|
|
|
++ 16 input zones (dry contacts).
|
|
|
++ MODBUS RS485 support.
|
|
|
++ 2x Shunt Reading Inputs.
|
|
|
++ Temperature OneWire Bus.
|
|
|
++ 2x Voltage input Measurement (up to 60VDC).
|
|
|
++ Build-in RTC.
|
|
|
++ USB type C.
|
|
|
++ Low power consumption.
|
|
|
++ \* External antenna.
|
|
|
++ \* Lora/LoraWan.
|
|
|
+
|
|
|
+
|
|
|
+(*) Optional
|
|
|
+
|
|
|
+
|
|
|
+
|
|
|
+#### Specifications
|
|
|
+| Parameter | Specification |
|
|
|
+| ------------- | ----------------------- |
|
|
|
+| Operating Voltage | 9-28VDC (48VDC optional) |
|
|
|
+| Antenna Type | Build-in or *External |
|
|
|
+| Operating Humidity | ＜90%RH |
|
|
|
+| Operating Temperature | -20°C ～ 55°C |
|
|
|
+| Storage Temperature | -10°C ～ 70°C |
|
|
|
+| Max. Ouput Current | 120mA at 12V |
|
|
|
+| Configuration | PC (with cable) or Mobile (with Conf adapter) |
|
|
|
+
|
|
|
+
|
|
|
+
|
|
|
+### Wiring Specs
|
|
|
+
|
|
|
+
|
|
|
+
|
|
|
+
|
|
|
+
|
|
|
+
|
|
|
+
|
|
|
+{{%expand "Open PIN TABLE" %}}
|
|
|
+
|
|
|
+| PIN | Description |
|
|
|
+| ------ | ----------- |
|
|
|
+| 1 | Voltage input/output |
|
|
|
+| 2 | Ground |
|
|
|
+| 3 | RS485 B |
|
|
|
+| 4 | RS485 A |
|
|
|
+| 5 | Shunt A (-) |
|
|
|
+| 6 | Shunt A (+) |
|
|
|
+| 7 | Shunt B (-) |
|
|
|
+| 8 | Shunt B (+) |
|
|
|
+| 9 | Voltage B |
|
|
|
+| 10 | Voltage A |
|
|
|
+| 11 | +5DC Output |
|
|
|
+| 12 | Temperature Bus |
|
|
|
+| 13 | Zone 2 |
|
|
|
+| 14 | Zone 1 |
|
|
|
+| 15 | Zone 4 |
|
|
|
+| 16 | Zone 3 |
|
|
|
+| 17 | Zone 6 |
|
|
|
+| 18 | Zone 5 |
|
|
|
+| 19 | Zone 8 |
|
|
|
+| 20 | Zone 7 |
|
|
|
+| 21 | Zone 10 |
|
|
|
+| 22 | Zone 9 |
|
|
|
+| 23 | Zone 12 |
|
|
|
+| 24 | Zone 11 |
|
|
|
+| 25 | Zone 14 |
|
|
|
+| 26 | Zone 13 |
|
|
|
+| 27 | Zone 16 |
|
|
|
+| 28 | Zone 15 |
|
|
|
+
|
|
|
+{{% /expand%}}
|
|
|
+
|
|
|
+### Configuration & Upgrade Inteface
|
|
|
+
|
|
|
+#### Upgrade with Firmware file
|
|
|
+
|
|
|
+**PC software WonkaTool:**
|
|
|
+
|
|
|
+<p>For upgrade via Firmware file you will need the PC software WonkaTool</p>
|
|
|
+<p><a href="WonkaTool.exe" target="_blank" title="WonkaTool">Download WonkaTool</a></p>
|
|
|
+
|
|
|
+
|
|
|
+
|
|
|
+
|
|
|
+
|
|
|
+
|
|
|
+**Web Interface <i class="fas fa-desktop"></i> & <i class="fas fa-mobile-alt"></i>**
|
|
|
+
|
|
|
+Take you Cellular or PC and connect it to the WiFi network **"Dakton_SerialNumber"** , after that open your browser <a href="http://192.168.4.1" target="_blank" title="Latest Firmware">http://192.168.4.1</a>
|
|
|
+
|
|
|
+Web credentials:
|
|
|
+* Username: ```admin```
|
|
|
+* Password: ```dakton1234```
|
|
|
+
|
|
|
+
|
|
|
+### Download Firmware
|
|
|
+
|
|
|
+
|
|
|
+<p>Latest: <a href="DK-MULTISENSOR.bin" target="_blank" title="Latest Firmware">Download</a></p>
|
|
|
+
|
|
|
+
|
|
|
+
|
